Levantis Supply ChainChina Procurement Control
ServicesProductsInsightsAboutContactWhatsApp

Insights

Buying an Articulating Boom Lift: How to Compare Quotes at the Same Working Height

The same maximum working height does not mean that two articulating boom lifts can carry the same load to the same position. When comparing Chinese suppliers’ quotations, first check the actual work position and load, then the access and site conditions, and finally the configuration and delivery scope. Some machines have different permitted working envelopes for different platform loads or configurations. The maximum figures in a brochure are not enough on their own. (IPAF)

This article is for buyers who have already decided to purchase an articulating boom lift. You do not need to revisit every equipment category, but you do need each supplier to propose a machine for the same task.

1. Define the task before asking the factory to recommend a model

“We need a 20 m articulating boom lift” is a useful starting point, but it does not yet define the machine you need.

Explain where the platform must reach, where the machine can be positioned, what obstacles lie between them, and the combined weight of people, tools and materials on the platform. State whether the height refers to the work position or the platform floor, and identify the reference point used to measure horizontal distance.

Also provide the access openings, turning and positioning space, ground conditions and other site restrictions. IPAF’s selection checklist considers height, outreach, the task, environment, ground and access together, rather than selecting a machine by height alone. (IPAF selection checklist)

Next, ask the supplier for the exact model’s working-envelope chart, with the required position marked for the applicable load. The existing guide to reach charts explains how to read the diagram; the purpose here is to use it to assess competing proposals, not to repeat the entire technical explanation.

You can continue requesting quotations while site information is incomplete, but keep the relevant items marked “to be confirmed.” A procurement comparison does not replace site-specific engineering and safety assessments.


2. Three quotations: which one should you rule out first?

Suppose you receive three quotations for articulating boom lifts with similar maximum working heights.

Offer A is cheaper, but the supplier has provided only maximum height, maximum outreach and platform capacity. There is no chart supporting the required work position under the relevant conditions.

Offer B is more fully documented. The supplier has provided the chart for the relevant load, and the quotation also includes some additional accessories.

Offer C’s documents already show that its permitted load is insufficient for the task.

This is a hypothetical comparison, not a description of actual suppliers or quotations. A sensible response is:

Rule out C in its current form. A lower price cannot resolve a failed essential requirement.

Request the missing information for A. An unconfirmed capability does not mean the machine is unsuitable, but A cannot yet be treated as the cheapest qualifying offer.

Continue checking B and separate its price components. Better documentation helps assessment; it does not prove that the machine is inherently better. Check whether the additional accessories are needed and can be priced separately.

This avoids choosing an offer simply because it is cheaper, or accepting every charge because another supplier has presented more polished documents.


3. Use one table to turn quotations into a purchasing decision

The table below continues the hypothetical comparison of A and B. For a real purchase, record the requirements, exact models, configuration revisions, chart revisions and quotation dates at the top.

Buyer’s requirementOffer A: evidence and resultOffer B: evidence and resultNext action
Work position and loadOnly maximum figures; combined capability cannot yet be assessedRelevant chart supplied and target position markedObtain A’s chart; check that both sets of documents apply to the configurations quoted
Access, positioning and site conditionsOnly overall dimensions suppliedMore dimensions and operating limits supplied; some site information still missingComplete the site information and refer it to the appropriate people for assessment
Power and operating arrangementsDescribed as “electric”; battery and charger scope unclearConfiguration listed, with additional upgrade optionsConfirm the necessary configuration; assess upgrades separately
Accessories, spares and documentsSome items unspecifiedIncludes an accessory and spare-parts packageUse one requirements list; identify included items, extra charges and items not needed
Delivery scope“Factory delivery,” without a complete location or allocation of responsibilitiesPriced to a named consolidation point in ChinaRequest revised quotations for the same delivery point and scope

Give each important item a clear status: meets the requirement, does not meet it, or further evidence required.

Do not enter zero for an unspecified cost, or mark an unverified capability as compliant. If the supplier cannot provide evidence needed to establish suitability, that offer should not be listed as a final qualifying option alongside confirmed candidates.

A completed table should show which offers have been ruled out, what each remaining supplier still needs to provide, and which proposals are ready for price comparison.


4. Split the price difference into three parts

Separate the difference between quotations into the following categories.

Costs needed to meet essential requirements

These cover the capability, configuration and delivery items necessary for the task. If a configuration is essential to doing the work, it cannot be removed simply to lower the quotation.

Ask the supplier to explain why it is necessary, rather than allowing every recommended option to become a mandatory purchase.

Optional upgrades

Higher-specification batteries, accessories or other proposed upgrades should have separate prices and a clear explanation of their use.

If the standard proposal already meets the requirements, the upgrade’s value depends on whether it resolves a real limitation. “High specification” or “more advanced” does not automatically establish purchasing value.

Costs arising from different supply scopes

One offer may include spares and another may not. One may end at the factory, while another includes delivery to a named consolidation point. Align those scopes before comparing equipment prices.

Use the following calculation structure:

Comparable price = equipment configuration that meets the requirements + essential items not yet included + remaining costs to reach the same delivery point.

Do not add charges already included. Keep unnecessary options as separate quotations rather than forcing them into both proposals.

The formal quotation should also record currency, quantity, delivery point, payment terms, estimated delivery timing and validity. These are among the important details identified in the US International Trade Administration’s pro forma invoice guidance. (Pro Forma Invoice)

For a budget covering delivery to an overseas warehouse, continue with the landed-cost method. This article first establishes whether the machines and supplier offers are comparable; assumed freight costs should not conceal an undefined supply scope.


5. Communication tip: technical answers and the quotation must refer to the same version

Watch for a mismatch between the machine discussed by the technical team and the configuration ultimately priced by sales.

You can send the supplier this message:

Please recommend an articulating boom lift against the work position, load and site restrictions in the attached brief, and mark the target position on the working-envelope chart for that load. The formal quotation should reference the same model, configuration revision and chart. Price the standard solution that meets our requirements, essential options and other upgrades separately. Clearly identify any conditions you cannot yet confirm.

Consolidate the answers in a dated quotation and its attachments. Avoid making the purchase depend on information scattered across separate message threads.

If the supplier proposes moving the machine, reducing the platform load or changing the work method, submit that as a revised proposal for the buyer and site team to assess. It cannot be marked as meeting the original, unchanged requirements.


6. Choose a supplier after the evidence and scope are clear

One supplier does not have to win on every specification. The final comparison should answer three questions:

Can the equipment perform the task? What remains unresolved? What is the actual price for the same supply scope?

Among qualifying offers, the lower-priced machine may be a sound choice. A more expensive offer may provide capability or delivery conditions that genuinely matter. The difference should be supported by specific documents and quotation terms, not assumptions that a cheap machine must be poor or a high-specification machine must be better.

Have articulating boom lift quotations and want to understand the price difference?

Send Levantis the quotations and a simple site sketch, identifying the target work position, platform load and destination.

We can help obtain the corresponding information from Chinese suppliers, separate configuration, accessory and delivery differences, and request comparable quotations. You can start with the information already available; any missing dimensions or conditions can then be identified and completed.

Our Services

Discuss this topic with Levantis